Drip Tapes-T-Tape Drip Tape


  • T-Tape Drip Tape Features

    • Turbulent-flow dripper technology provides a high level of flow rate uniformity
    • White stripe with product information for easier installation and storage
    • Self-closing slit outlet (ideal for SDI systems)
    • Install on the ground, under opaque plastic, or even subsurface

    One of the most recognized and trusted drip tape brands in the world, T-Tape Drip Tape is used in a variety of crops around the world to help reduce water consumption, increase crop quality, and increase crop yields. T-Tape Drip Tape can be installed on the ground, under plastic, or even subsurface. Because of T-Tape’s material strength, design, and quality production standards, it’s the drip tape that you can count on year after year.

    T-Tape is available in a wide assortment of configurations, including various lengths, wall thickness, emitter spacings and flow rates. Helping growers match individual growing situations with maximum yield benefits.

    Applications

    • Surface
    • Under Mulch (buried)
    • Subsurface

    Suggested Use of T-Tape Drip Tape

    5/8″ (5 mil): Short season crops in medium tilled soils that contain slight residue from a previous crop. Beneficial for crops such as strawberries, melons and onions.

    5/8″ (6 mil): Minimum tilled soils, double cropping, medium textured soils or where rocks or previous crop residue is a factor. Commonly used in tomatoes, peppers, melons and strawberries.

    5/8″ and 7/8″ (8 mil): Minimum tilled soils, double cropping, heavier tilled soils, or where more resistance to abrasion and insect damage is desired. Used in peppers, tomatoes, melons and vegetable crops.

    5/8″ and 7/8″ (10 mil): Heavy or rocky soil, where insects are a problem, where it is to be moved or reused for multiple seasons.

    5/8″ and 7/8″ (15 mil): Heavier soil or soils presenting rougher terrain where insects are a stronger threat, even small animals. Used in sugarcane, asparagus and SDI applications. T-Tape is the solution to the challenges faced by growers. T-Tape was developed to meet the individual grower’s needs.


    Product Options
    Diameters: ⅝”, ⅞”, 1⅛”, 1⅜”
    Wall Thickness: 5 – 15 mil
    Flow Rates: 0.11- 1.34 gpm/ 100 ft.
    Average Roll Weight: 65 lbs.

     

    Operating Guidelines
    Minimum operating pressure: 4 PSI
    Recommended operating pressure: 8 PSI

     

    Maximum operating pressures:
    Wall Diameter
    (mil) 5/8” 7/8” 1 1/8” 1 3/8”
    5 6
    6 10
    8 15 10 8
    10 15 15 10
    12 15 15 12
    15 15 15 15 15

     

    Roll Length
    Dia. (inch) Wall (mil) Roll length (ft)
    5/8 5 12,000
    6 10,000
    8 7,500
    10 6,000
    12 5,100
    15 4,100
    7/8 6 7,380
    8 5,560
    10 4,400
    12 3,724
    15 3,002
    1 ⅛ 8 5,580
    10 4,410
    12 3,775
    15 3,035
    1 ⅜ 15 2,700

     

    T-TapeS – Ultra Low Flow – 5/8” or 7/8”

    Recommended Filtration Mesh Micron
    270 53
    Dia. Wall Spacing Flow Rate* Roll Flow Max. Op. Max. Flush Max. Length
    length Rate* Pressure Pressure of Run**
    (inch) (mil) (inch) (gpm/100 ft) (ft) (gph) (psi) (psi) (ft)
    5/8 5 6 0.22 12,000 0.07 8 11 685
    5/8 5 8 0.17 12,000 0.07 8 11 790
    5/8 5 9 0.15 12,000 0.07 8 11 850
    5/8 5 12 0.11 12,000 0.07 8 11 1040
    5/8 6 6 0.22 10,000 0.07 10 13 770
    5/8 6 8 0.17 10,000 0.07 10 13 790
    5/8 6 12 0.11 10,000 0.07 10 13 1040
    7/8 6 6 0.22 7,380 0.07 8 10 1335

    T-TapeS – Low Flow – 5/8”

    Recommended Filtration Mesh Micron
    200 80
    Dia. Wall Spacing Flow Rate* Roll Flow Max. Op. Max. Flush Max. Length
    length Rate* Pressure Pressure of Run**
    (inch) (mil) (inch) (gpm/100 ft) (ft) (gph) (psi) (psi) (ft)
    5/8 5 8 0.27 12,000 0.11 8 11 671
    5/8 5 12 0.22 12,000 0.13 8 11 720
    5/8 6 8 0.27 10,000 0.11 10 13 671
    5/8 6 12 0.22 10,000 0.13 10 13 770
    5/8 6 8 0.27 7,380 0.11 8 10 1190
    5/8 6 12 0.22 7,380 0.13 8 10 1335
    5/8 6 12 0.27 7,380 0.16 8 10 1200

     

    *Flow rates calculated at 8 psi.
    **Length of runs calculated using Hydraulic Tool.
    ***Flow rate per dripper.

     

    Product Information Operating Data
    Dia.
    (inch)
    Wall
    (mil)
    Spacing
    (inch)
    Flow Rate*
    (gpm /100 ft)
    Flow
    Rate *(gph)
    Flow
    Rate Class
    Rec. Filtration Max. Op.
    Pressure (psi)
    Max. Flush
    Pressure (psi)
    Max .Length
    of Run** (ft)
    (mesh) (micron)
    5/8 5 4 1.00 0.20 Med. 150 100 8 11 285
    5/8 5 6 0.67 0.20 Med. 150 100 8 11 375
    5/8 5 8 0.34 0.14 Low 200 80 8 11 595
    5/8 5 8 0.45 0.18 Med. 150 100 8 11 490
    5/8 5 8 0.50 0.20 Med. 150 100 8 11 450
    5/8 5 8 0.67 0.27 Med. 150 100 8 11 375
    5/8 5 12 0.45 0.27 Med. 150 100 8 11 490
    5/8 6 4 1.00 0.20 Med. 150 100 10 13 285
    5/8 6 6 0.45 0.14 Low 200 80 10 13 445
    5/8 6 6 0.67 0.20 Med. 150 100 10 13 375
    5/8 6 8 0.34 0.14 Low 200 80 10 13 595
    5/8 6 8 0.50 0.20 Med. 150 100 10 13 450
    5/8 6 8 0.67 0.27 Med. 150 100 10 13 375
    5/8 6 12 0.34 0.20 Med. 150 100 10 13 595
    5/8 6 12 0.45 0.27 Med. 150 100 10 13 490
    5/8 6 16 0.34 0.27 Med. 150 100 10 13 595
    5/8 8 4 1.00 0.20 Med. 150 100 15 18 285
    5/8 8 6 0.45 0.14 Low 200 80 15 18 490
    5/8 8 6 1.34 0.40 High 150 100 15 18 240
    5/8 8 8 0.34 0.14 Low 200 80 15 18 580
    5/8 8 8 0.50 0.20 Med. 150 100 15 18 450
    5/8 8 8 0.67 0.27 Med. 150 100 15 18 375
    5/8 8 12 0.22 0.13 Low 200 80 15 18 770
    5/8 8 12 0.34 0.20 Med. 150 100 15 18 595
    5/8 8 12 0.45 0.27 Med. 150 100 15 18 490
    5/8 8 16 0.17 0.14 Low 200 80 15 18 930
    5/8 8 16 0.34 0.27 Med. 150 100 15 18 595
    5/8 10 6 1.34 0.40 High 120 130 15 22 240
    5/8 10 8 0.34 0.14 Low 200 80 15 22 595
    5/8 10 8 0.50 0.20 Med. 150 100 15 22 450
    5/8 10 8 0.67 0.27 Med. 150 100 15 22 375
    5/8 10 12 0.22 0.13 Low 200 80 15 22 770
    5/8 10 12 0.34 0.20 Med. 150 100 15 22 595
    5/8 10 12 0.45 0.27 Med. 150 100 15 22 490
    5/8 10 16 0.34 0.27 Med. 150 100 15 22 595
    5/8 10 30 0.25 0.38 High 120 130 15 22 720
    5/8 12 12 0.45 0.27 Med. 150 100 15 26 490
    5/8 15 8 0.50 0.20 Med. 150 100 15 33 450
    5/8 15 8 0.67 0.27 Med. 150 100 15 33 375
    5/8 15 12 0.45 0.27 Med. 150 100 15 33 490
    *Flow rates calculated at 8 psi.
    ** Length of runs calculated using Hydraulic Tool.

     

    Product Information Operating Data
    Dia.
    (inch)
    Wall
    (mil)
    Spacing
    (inch)
    Flow Rate*
    (gpm /100 ft)
    Flow
    Rate *(gph)
    Flow
    Rate Class
    Rec. Filtration Max. Op.
    Pressure (psi)
    Max. Flush
    Pressure (psi)
    Max .Length
    of Run** (ft)
    (mesh) (micron)
    7/8 6 8 0.34 0.14 Low 200 80 8 10 1030
    7/8 8 8 0.34 0.14 Low 200 80 10 12 1030
    7/8 8 8 0.50 0.20 Med 150 100 10 12 795
    7/8 8 8 0.67 0.27 Med 150 100 10 12 665
    7/8 8 12 0.22 0.13 Low 200 80 10 12 1350
    7/8 8 12 0.34 0.20 Med 150 100 10 12 1030
    7/8 8 12 0.45 0.27 Med 150 100 10 12 865
    7/8 10 6 0.45 0.14 Low 200 80 15 16 865
    7/8 10 8 0.34 0.14 Low 200 80 15 16 1030
    7/8 10 8 0.67 0.27 Med 150 100 15 16 665
    7/8 10 12 0.34 0.20 Med 150 100 15 16 1030
    7/8 10 12 0.45 0.27 Med 150 100 15 16 865
    7/8 12 8 0.34 0.14 Low 200 80 15 19 1030
    7/8 12 12 0.27 0.16 Low 200 80 15 19 1200
    7/8 12 12 0.45 0.27 Med 150 100 15 19 865
    7/8 15 8 0.34 0.14 Low 200 80 15 23 1030
    7/8 15 8 0.67 0.27 Med 150 100 15 23 665
    7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
    7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
    7/8 15 12 0.22 0.13 Low 200 80 15 23 1350
    7/8 15 12 0.34 0.20 Med 150 100 15 23 1030
    7/8 15 12 0.45 0.27 Med 150 100 15 23 865
    7/8 15 16 0.28 0.23 Med 150 100 15 23 1165
    *Flow rates calculated at 8 psi.
    ** Length of runs calculated using Hydraulic Tool.

     

    Product Information Operating Data
    Dia.
    (inch)
    Wall
    (mil)
    Spacing
    (inch)
    Flow Rate*
    (gpm /100 ft)
    Flow
    Rate *(gph)
    Flow
    Rate Class
    Rec. Filtration Max. Op.
    Pressure (psi)
    Max. Flush
    Pressure (psi)
    Max .Length
    of Run** (ft)
    (mesh) (micron)
    1 ⅛ 8 12 0.34 0.20 Med 150 100 8 10 1583
    1 ⅛ 8 12 0.45 0.27 Med 150 100 8 10 1336
    1 ⅛ 10 12 0.34 0.20 Med 150 100 10 12 1583
    1 ⅛ 12 12 0.34 0.20 Med 150 100 12 15 1583
    1 ⅛ 15 12 0.22 0.13 Low 200 80 15 18 2045
    1 ⅛ 15 12 0.34 0.20 Med 150 100 15 18 1583
    1 ⅛ 15 12 0.45 0.27 Med 150 100 15 18 1350

     

    Product Information Operating Data
    Dia.
    (inch)
    Wall
    (mil)
    Spacing
    (inch)
    Flow Rate*
    (gpm /100 ft)
    Flow
    Rate *(gph)
    Flow
    Rate Class
    Rec. Filtration Max. Op.
    Pressure (psi)
    Max. Flush
    Pressure (psi)
    Max .Length
    of Run** (ft)
    (mesh) (micron)
    1 ⅜ 15 12 0.22 0.13 Low 200 80 15 16 2876
    1 ⅜ 15 12 0.34 0.20 Medium 150 100 15 16 2232
    1 ⅜ 15 12 0.45 0.27 Medium 150 100 15 16 1884