Sprinklers And Sprays - Tornado Ray Jet Stream Spray


  • Tornado Ray Jet Stream Spray Features

    • Unique vortex mechanism allows significantly large water passages minimizing clogging
    • No moving parts to break, jam, or wear out

    No moving parts to break, jam, or wear out. The Tornado line of jet stream Sprays provide dependability in numerous irrigation applications, including application in orchards and greenhouses.

    The Tornado line of jet stream Sprays uses a vortex nozzle which creates a turbulent water flow throughout the large passage way. And with the turbulent flow and large passage way clogging hazards are minimized – Even at low flow rates.

    The Tornado line of jet stream Sprays includes the Tornado Ray Jet Stream Spray and the Tornado Mist Spray. From young trees to established orchards, there’s a Tornado Jet Stream Spray that’s right for you. Depend on Tornado.

    Applications
    • Under tree irrigation in fruit orchards, inverted in greenhouses

    Product Options
    Flow rates at 22 psi 6.6,9,14.5,18.5 gph
    Wetting Patterns 180˚ (8 jet streams), 300˚ (10 jets), 360˚ (8 or 12 jets)

     

    Operating Guidelines
    Operating pressure 22-42 psi
    Filtration requirements
    GPH Microns Mesh
    <11 130 120
    11-18 200 80
    >18 250 60

     

    Nozzle
    (size)
    Flow
    Rate
    Wetting
    Diameter
    Pipe
    Diameter
    Max. Number of Jet Sprays
    on Irrigation Laterals*
    Spacing Between Sprays (ft)
    (inch) (gph)** (ft)*** (O.D.
    inch)
    7 8 10 11 13 15 16 18 20 21
    Black (0.035) 6.6**** 7.9 0.6 26 24 22 21 20 19 18 18 17 16
    0.7 32 29 27 26 24 23 22 22 21 20
    0.8 40 37 34 33 31 30 28 27 27 26
    Blue (0.051) 9 10.5 0.6 20 19 18 17 16 15 14 14 13 13
    0.7 25 23 21 20 19 18 18 17 16 16
    0.8 32 29 27 26 25 23 23 22 21 20
    Green (0.067) 14.5 11.8 0.6 15 14 13 12 12 11 11 10 10 10
    0.7 19 17 16 15 14 14 13 13 12 12
    0.8 24 22 21 19 18 18 17 16 16 15
    Red (0.079) 18.5 13.8 0.6 14 13 12 11 11 10 10 10 9 9
    0.7 18 16 15 14 13 13 12 12 11 11
    0.8 22 21 19 18 17 16 16 15 15 14

    * At ± 5% flow variation

    **Inlet pressure: 21.8 psi

    ***Upright position, 10″ above ground (360˚ – 12 jet streams)

    ****Tornado take-apart: 7.3 gph

    One-piece Tornado Ray Jet Spray with 5 mm (.20”) threaded inlet stem – fits 4×7 mm (.16” x .28”) feeder tubes and the clip hammer stake

    One-piece Tornado Ray Jet Spray with conic male inlet stem – matches Rivulis’ Meteor adapter (#71) with conic female outlet

    Take-apart vortex nozzle, assembled with a ray jet grooved cap on Rivulis’ Meteor adapter (#46), fits spiked stakes.

    The Meteor adapter is available with pressure-regulator.